BAOFENG - UV-5R (DUAL BAND VHF/UHF TRANSCEIVER RADIO)

BaoFeng introduced the UV-5R Dual Band Radio, Dual Display in 2012. Since its introduction, the UV-5R has been a huge success. The UV-5R has seen 2 major changes since its launch, with the second generation identified by the BFB297 (2nd gen.) firmware in early 2013 and the N5R firmware change in August 2014.

There are several cosmetic variations of UV-5R. These variants have no differences from the UV-5R other than their cosmetic design and the possible removal of the "Band Key" (no longer required in Gen. 2).

Variations include: UV-5R v2+, UV-5RA, UV-5RE, UV-5R+ (Plus), along with many other less produced variants. Some of these variations may also no longer work with case-specific accessories such as the original UV-5R batteries.

In late 2013, the UV-5R also included a new generation of variants with the inverted (privacy) display series; with the introduction of the BF-F8+ and its cosmetic variants (such as the GT-3 and 997-S).

Finally, in the fall of 2014, the UV-5R saw its successor the 3rd. BF-F8HP generation.

Features - Original Product Launch 2012 (1st Generation)

Programmable ham radio with high/low power settings (4W/1W)
Frequency range: 65-108 MHz (commercial FM radio reception only) VHF: 136-174 MHz (Rx/Tx). UHF: 400-520 MHz (Rx/Tx)
Customize channel names, startup display and more using the FTDI PC03 programming cable
1500mAh battery (labeled 1800mAh); Wideband (wide) 25 kHz / narrowband (narrow) 12.5 kHz selectable
Automatic keypad lock, dual band, dual display and dual standby
The BaoFeng UV-5R is a compact portable transceiver that delivers 4 watts in the frequency range of 136-174 MHz and 400-480 MHz (520 MHz later versions). It is a compact and economical HT that includes a special VHF reception band from 65 to 108 MHz which includes the normal FM transmit band. Dual clock and dual reception are supported. Get up to 128 memories. Other features include: selectable wide/narrow, battery saving function, VOX, DCS/CTCSS coding, key lock and built-in flashlight. Selectable frequency steps include: 2.5, 5, 6.25, 10, 12.5 and 25 kHz. RF power can be selected at 4 or 1 watt. This radio comes with SMA-Female antenna, flexible antenna, BL-5 lithium-ion battery (7.4V 1500 mAh (labeled 1800mAh)), belt clip, wrist strap, AC adapter (8.4V 600ma) and charging tray. drop-in charging. This radio requires the FT03 PC03 programming cable.

Features - Updated ProducT Launch Late 2013 (2nd Generation)

Radio Frequency IC:

Updated SQ to improve anti-interference ability
RDA1846S adds a new tail tone elimination function, during signal transmission and reception between 50Hz and 55Hz
Improves the receiver's AGV switching noise when the signal strength changes severely

Frequency modulated receiver chip:

RDA5802N has a powerful low-IF digital audio processor, making it the best sound quality with variable reception conditions

Power amplifier IC:

Low crossover distortion
Low quiescent circuit current

N5R Firmware (August 2014)

Hold '0' - Display Voltage
Removes cloning features (due to numerous firmware changes)
VERSATILE RADIO FOR AMATEUR USE
BaoFeng UV-5R is legal for use on amateur frequencies. The UV-5R is capable of transmitting on narrowband (12.5 kHz) and wideband (25 kHz).

Dual Watch Receiver
BaoFeng UV-5R has a built-in receiver but can "watch" two channels (semi-duplex). Monitor two different frequencies (even on different bands (VHF/UHF)) and the radio will monitor both frequencies giving priority to the first station to receive an incoming call.

FM broadcast station
You can listen to FM Broadcast radio, while still monitoring your radio frequencies in the background. Every incoming call will be given priority ensuring you never miss an important call while listening to the radio.

Group tones supported
BaoFeng UV-5R supports the most common analog tones. Supports CTCSS, DCS and DTMF calling methods. Set your calling methods to call based on group tones. Tone dialing (private line) is required by most repeater applications and the UV-5R supports the latest standards

BaoFeng UV-5R can even send DTMF tones. This allows you to send ANI (caller ID) or remote commands that require DTMF tones

Alias ​​templates: just cosmetically different
UV-5R5

UV-5Rv2+

UV-5RA

UV-5RE

UV-5R+ (Plus)

Customize your operations with channels, programmable buttons and more!
You can program the BaoFeng UV-5R exactly how you want it. There are 128 programmable memory channels. You can add or remove channels from the scan list using free computer software. You can assign alphanumeric names to channels, using a computer. The radio has 2 power levels (maximum 5 watts), allowing you to choose how far you can communicate. You can set VFO limits using CHIRP software. You can easily program from a PC to set up your radio to work exactly as you need it to.