TORCH - FENIX - TK25 RED VERSION

The Fenix ​​TK25 red version flashlight features multi-color LEDs built into an innovative mode switching mode. This patent-pending operation allows the user to have two separate operating products in one compact flashlight. With a simple twist of the head, the user can switch between high-performance white LED flashlight mode, and red light flashlight mode to support your hunting or tactical needs. The high-performance flashlight features a white light that includes 4 power levels and variable strobe. The Turbo setting puts out a maximum output of 1000 lumens and a beam distance of 225 meters. Simply rotate the head and the light changes to red LED operation with up to 310 lumens.

Flashlight dimensions:
Length: 5.61" (142.6mm)
Diameter: 1.0" (25.4mm)
Head: 1.57" (40mm)

Torch weight:
5.52 ounces (156.5 g) excluding battery

Batteries:
One 18650 rechargeable lithium ion battery or two 3V CR123A lithium batteries

Included:
Lanyard, holster, spare O-ring, body clip

Warranty:
Limited lifetime warranty from Fenix ​​Lighting US

Additional features of the TK25 red flashlight
Cree XP-G2 S3 and XP-E2 red LEDs with a lifespan of 50,000 hours
Rotating flashlight head for free switching between white and red lights
Compatible with AER-03 remote pressure switch
Digitally regulated output maintains constant brightness
Reverse polarity protection, to protect against incorrect battery insertion
Tactical tail switch for momentary activation
Functional tail switch for output selection and instant flash
Made of high strength and oxidation resistant aluminum
Premium HAIII type hard anodized anti-abrasive finish
Ultra-clear tempered glass lens with anti-reflective coating.

Instructions for Use
Double switches
The round switch is the tactical switch and the oval switch is the functional switch.

ON OFF
Tap the tactical switch to momentarily turn on the light; the light will activate the last stored output in white light mode or the last stored output in red light mode; release and the light will turn off.

Fully press the tactical switch to constantly turn on the light. Press again to turn off the light.

With the light off, press the functional switch for instant activation of the strobe light in White Light mode or to enter Red Light mode in Red Light mode, release it and the light will turn off.

Strobe
With the light on in White mode - long press the functional switch to activate the strobe. Click again to return to the previous output.

Output selection
With the light on in White mode: Click the functional switch to cycle between Low → Medium → High → Turbo.

With the light on in Red mode: Click the functional switch to cycle between Low → Medium → High.

Mode change
Rotate the light head to switch between white and red light modes.

Intelligent memory circuit
The light remembers the last brightness level selected in white and red light modes. When you turn it back on, the previously used brightness level will be recalled.

Low voltage warning
When the voltage level drops below the preset level, the flashlight is programmed to switch to a lower brightness level until low power is reached. When this happens in low output mode, the flashlight flashes three times every five minutes to remind you to replace the battery. To ensure normal use, the flashlight does not turn off automatically and will work until the battery runs out completely. (White light flashes in White Light mode and red flashes in Red Light mode.)

Overheat protection
The light will accumulate a lot of heat if used at Turbo power level for extended periods. When the light reaches a temperature of 65°C or higher, the light will automatically drop a few lumens to reduce the temperature. As the temperature is reduced, the output will gradually return to the Turbo output level.

Battery replacement
Unscrew the tail cap to insert the battery with the anode (+) side towards the light head, then screw the tail cap back on.

Use and maintenance
Disassembly of the sealed head may cause damage to the light and void the warranty.
Fenix ​​recommends using an excellent quality battery.
If the light will not be used for a long time, please remove the battery or the light may be damaged by electrolyte leakage or battery explosion.
Unscrew the tail cap half a turn or take out the battery to prevent accidental activation during storage or transportation.
Long-term use may cause wear of the O-ring. To maintain adequate water tightness, replace the ring with an approved replacement．
Periodically cleaning the battery contacts improves the performance of the lamp as dirty contacts can cause the lamp to flicker, shine intermittently, or not even light up for the following reasons:
A: The battery needs to be replaced.
Solution: Replace the battery (make sure the battery is inserted according to the manufacturer's specifications).

B: The wires, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton ball soaked in alcohol.

If the above methods do not work, contact your authorized distributor.

warning
This flashlight is a high intensity lighting device capable of causing harm to the user's eyes or others. Avoid shining the flashlight directly into anyone's eyes.

https://youtu.be/JPSQRoX7Jd4