TORCH - FENIX - HT18R V2.0 | 3700 LUMENS

Designed for the needs of hunters and adventurers, the Fenix ​​HT18R V2.0 delivers exceptional performance in every detail. Its smooth reflector produces a razor-sharp beam with a maximum output of 3,700 lumens, reaching an incredible 1,100 meters for unparalleled long-range visibility. Powering the flashlight is easy thanks to the USB Type-C port, paired with a high-capacity ARB-L21-6000 battery that fully charges in just 1.5 hours. The dual side switch provides instant access to Turbo and Strobe, while specialized modes like SOS and Beacon ensure readiness for any scenario. Built to last, the HT18R V2.0 is drop-tested from 1 meter and is waterproof to IP68. From tracking game to navigating the wilderness, this flashlight offers cutting-edge brightness, robust performance, and intuitive control—all in one reliable lighting tool.

Specifications

Learn more

• The round switch is the tactical switch for on/off, momentary fire, instant burst and additional functions.
• The rectangular switch is the functional switch for output selection, mode switching, instant strobe and other functions.

• With the light off, tap the tactical switch to turn it on momentarily, release it, and the light will turn off. Press the tactical switch fully to keep the light on continuously.
• With the light on, fully press the tactical switch to turn it off.

• With the light on, press and hold the Function switch for 0.5 seconds to enter Special mode. Press and hold the Function switch again for 0.5 seconds or press the Tactical switch to exit Special mode and recall the previously used General mode exit. Alternatively, fully press the Tactical switch to turn the light off.

• With the light on: In General mode, click the functional switch once to cycle between Burst→High→Medium→Low.
• With the light on: In Special mode, click the functional switch once to cycle between Strobe→SOS→Beacon.

• With the light off, press the function switch to activate Strobe mode, release it and the light will turn off.

• With the light on, fully press the tactical switch for 0.5 seconds to activate Burst mode, release to recall the previously used output.
• With the light off, fully press the tactical switch for 0.5 seconds to activate Burst mode, release it and the light will turn off.

• Lockout: With the flashlight unlocked, press the tactical and functional switches simultaneously for 3 seconds; the flashlight will flash twice on low output to indicate the locked state*.
• Unlocking: With the light locked, fully press the tactical switch and the functional switch simultaneously for 3 seconds; the flashlight will activate on the previously used output to indicate that the flashlight is unlocked.

• The flashlight automatically stores the previously used output, excluding Strobe, SOS, and Beacon. The next time it's turned on, the previously used output will be recalled.

• Unscrew the light tail and insert the battery with the anode (+) side facing the light head, then screw the light tail back on.

• Slide the port cover on the neck of the flashlight to reveal the charging port, then connect the USB Type-C end of the charging cable to the flashlight.
• The battery level indicator will be red while charging and will turn green when fully charged.
• Once charging is complete, be sure to unplug the charging cable and slide back the dust cover.
• When charging fails or the battery is connected backwards, the battery level indicator will remain off or flash red to remind users to check the battery.

• Charging time is approximately 1.5 hours from empty to fully charged with a 9V/3A charging adapter. Using a 5V/3A non-fast charging adapter, charging time is approximately 2.5 hours. The flashlight cannot be used while charging.
• Recharge your stored flashlight every four months to maintain optimum battery performance.
• Works only with a Fenix ​​ARB-L21 Series rechargeable battery.

• Green light on: 100% - 85% saturated
• Flashing green light: 85% - 50% sufficient
• Red light on: poor 50% - 25%
• Flashing red light: critical 25% - 1%

• The flashlight will build up a lot of heat if used at high power levels for extended periods. When the flashlight reaches a temperature of 60°C/140°F or higher, it will automatically decrease the output by a few lumens to reduce the temperature. When the temperature drops below 60°C/140°F, the flashlight will gradually restore the preset power level.

• When the voltage drops below the preset level, the flashlight is programmed to switch to a lower brightness level until the minimum power level is reached. When this happens, the battery level indicator flashes red to remind users to recharge or replace the battery as soon as possible.

• Disassembling the sealed head may damage the flashlight and void the warranty.
• Fenix ​​​​recommends using a high-quality battery.
• If the flashlight is not used for a long time, remove the battery, otherwise the flashlight may be damaged due to electrolyte leakage.
• Unscrew the rear cap a few turns or remove the battery to prevent accidental activation during storage or transport.
• Prolonged use may cause the O-ring to wear. To maintain a proper hydraulic seal, replace the O-ring with an approved replacement.
• Periodically cleaning the flashlight and battery contacts improves the performance of the flashlight, as dirty contacts can cause the flashlight to flicker, flash, or even not light at all for the following reasons:

• DO NOT leave this flashlight within the reach of children!
• DO NOT point this flashlight directly into anyone's eyes!
• DO NOT place the lamp head near flammable objects, high temperatures can cause objects to overheat and make them flammable/combustible!
• DO NOT use this flashlight inappropriately, such as holding it in your mouth, as this may cause serious personal injury or death if the flashlight or internal battery fails!
• This flashlight accumulates a considerable amount of heat during operation, resulting in a high light source temperature. Use extreme caution to avoid burns.
• Remove the battery to avoid accidental activation when the flashlight is placed in a closed, flammable environment, such as pockets and backpacks!
• The LED in this light is not replaceable; therefore, when the LED reaches the end of its useful life, the entire light will need to be replaced.