TORCH - FENIX - TK30 WHITE LASER 500 LUMEN

The Fenix ​​TK30 is a white laser flashlight. A Class 3B laser stimulates a fluorescent crystal to create broad-spectrum white light, allowing this flashlight to throw 500 lumens a staggering distance of 1200 m (3937 feet), that's 3/4 of a mile! Laser light creates a more focused spotlight beam, compared to a standard LED flashlight, with little light spillage. The tactical tail switch works on/off and momentarily on while the side switch manages the 3 lighting modes. Other features include a battery level indicator and it is IP68 dust and water resistant. Made for tactical applications where distance is the priority, the Fenix ​​TK30 flashlight will not disappoint.

TK30 Laser Torch Dimensions:
Length: 6.2" (158mm)
Head: 1.3" (32 mm)
Body: 1.0" (26mm)

TK30 weight:
5.15 oz. (146 g) excluding battery

TK30 battery:
One rechargeable 21700 lithium-ion battery (included) or one 18650 lithium-ion battery (not included) for use with the ALF-18 battery holder (not included)

Included:
Fenix ​​ARB-L21-5000U Rechargeable Li-Ion Battery, USB Type-C Charging Cable, Lanyard, Holster, Spare O-ring

Warranty:
Fenix ​​Lighting USA Limited Lifetime Warranty

Additional features of the Fenix ​​​​TK30 laser flashlight
White laser light with a maximum power of 500 lumens and a beam distance of 1200 meters.
One 21700 5000mAh rechargeable lithium-ion battery included.
Tactical tail switch for instant activation.
Functional side switch for output selection.
Boot battery level indication, low voltage warning and intelligent memory circuit.
Intelligent protection against high surface temperature.
Reverse polarity protection, to protect against improper battery insertion.
Made of durable A6061-T6 aluminum.
Premium HAIII type hard anodized anti-abrasive finish.
Laser classification: Class IIIb / Class 3B

https://youtu.be/C8hPic3qNk4

TK30 laser flashlight switches
The tail switch is the tactical switch, the side switch is the functional switch.

ON OFF
When the light is off, touch the tail switch to momentarily turn on the light, release it and the light will turn off.
Fully press the tail switch to constantly turn on the light, press one more time to turn off the light.

OUTPUT SELECTION
When the light is on, click the functional side switch once to cycle Low → High.

STROBE
When the light is on, press and hold the functional switch for 0.8 seconds to enter strobe. Click the functional side switch once to return to the previously used output.

INTELLIGENT MEMORY CIRCUIT
The light memorizes the last selected output excluding the strobe. When switched on again, the previously used output will be recalled.

BATTERY LEVEL INDICATION
When the light is on, the battery level indicator inside the side switch will light up to display the battery status, the indicator will stay on for 3 seconds before turning off.

Green light on: saturated
Flashing green light: sufficient
Red light on: poor
Flashing red light: critical
Note: Only works with Fenix ​​ARB-L21 21700 Series Rechargeable Li-Ion Battery.

BATTERY SPECIFICATIONS
Type Dimensions Nominal voltage Recommended
Fenix ​​ARB-L21 Series Rechargeable Li-Ion Battery 21700*3.6V
Fenix ​​ARB-L18 Series Rechargeable Li-Ion Battery 18650 3.6V
Warning: Fenix ​​dedicated ALF-18 battery holder needs to be used together when using 18650 lithium ion battery.

*18650 and 21700 lithium ion batteries are powerful cells designed for commercial applications and should be treated with caution and handled with care. Using only quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuit are potential risks that the user assumes.

BATTERY REPLACEMENT
Unscrew the tail cap to insert the battery with the anode (+) side towards the light head, then screw the tail cap back on.

Low voltage warning
When the voltage level drops below the preset level, the flashlight is programmed to switch to a lower brightness level until the Low output is reached. When this happens in low output mode, the indicator in the middle of the functional side switch will flash red to remind you to recharge or replace the battery. To ensure normal use, the flashlight will not turn off automatically and will work until the battery runs out completely.

Note: Only works with Fenix ​​ARB-L21 21700 Series Rechargeable Li-Ion Battery.

Intelligent protection of the TK30 laser flashlight
The light accumulates a lot of heat when used at turbo power level for extended periods. When the light reaches a temperature of 65°C or higher, the light will automatically dim a few lumens to reduce the temperature. When the temperature is reduced, the output will gradually return.

USE AND MAINTENANCE
Disassembling the sealed head may cause damage to the light and will void your warranty.
Fenix ​​recommends using only quality batteries with adequate built-in protections.
If the light will not be used for a long time, please remove the battery, otherwise the light may be damaged by electrolyte leakage or battery explosion.
The included battery needs to be charged when it is low. Please charge the battery immediately when it is low without worrying about affecting the lithium ion. It has no memory effect.
Unscrew the tail cap half a turn or take out the battery to avoid accidental activation during storage or transportation.
Long-term use may cause wear of the O-rings. To maintain proper water tightness, replace the ring with an approved replacement (included) if damaged．
Periodically cleaning the battery contacts improves the performance of the lamp as dirty contacts can cause the lamp to flicker, shine intermittently, or not even light up for the following reasons:
A: The battery needs to be replaced.
Solution: Replace the battery (make sure the battery is inserted according to the manufacturer's specifications).
B: The wires, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton ball soaked in denatured alcohol.
If the above methods do not work, contact your authorized distributor.

WARNING
This flashlight features white laser light, and the emitted beam contains laser components (less than 0.45W). Improper use can cause eye damage or skin burns.
Do not point the flashlight directly into anyone's eyes to prevent eye damage to the user or others.
Do not stare at the facula for a long time at a close distance to avoid vision
Do not illuminate the skin for a long time to prevent skin burns.
Non-professionals are prohibited from disassembling this product.
Store the product in a safe place out of the reach of children. Children are not allowed to use the product without supervision.